Clean p330i принтер zebra

Cleaning Performance Class Printer (P330i and P430i)

Article ID: 36810543

Details

You can swab rollers within the printer with a q-tip and 70%-90% isopropyl alcohol for minor cleaning. The following procedure details how to run a full cleaning process on the unit.

Zebra Performance Class Printers (P330i and P430i)

Access to printer driver to send cleaning command to printer as well as the printer cleaning kit for the P330i/P430i. The cleaning kit part number is 105912-913 and can be ordered through a Zebra reseller. Read More>>

There are three different options of obtaining information on performing the cleaning procedure. Each require the necessary supplies.

How To Clean Printer using front panel button

1. Leave power on.

(a) Open Cover and release Print Head Bracket to remove ribbon.

(b) Close print head.

(c) Close Cover. Remove cards from Card Cartridge.

2. Insert one Pre-saturated Cleaning Card (provided) through slot on the side of the Card Feeder.

3. Press the Panel Button for a few seconds. The Card will feed into printer and carry out the cleaning Process. Repeat the process with a new Cleaning Card if necessary.

The Zebra.com support page for your printer has a video walk through on how to run the cleaning procedure properly. Below are links to this page for both the P330i and P430i printers. See How-To Videos.

You can visit your printer’s User’s Guide for more details on how to run the process. The following link is from the P430i model printer’s user’s guide, but the process still applies to the P330i. Read More>>

Источник

Zebra Technologies P330i User Manual

980459-001 Rev. A

This manual contains installation and operation information for the Zebra P330 i Card Printers manufactured by Zebra Technologies Corporation, Camarillo, California.

Return Materials Authorization

Before returning any equipment to Zebra Technologies Corporation for in-warranty or out-of- warranty repair, contact Repair Administration for a Return Materials Authorization (RMA) number. Repack the equipment in the original packing material and mark the RMA number clearly on the outside. Ship the equipment, freight prepaid, to the address listed below:

• For USA, Latin America, and Asia / Pacific: Zebra Technologies Corporation

Zebra Card Printer Solutions 1001 Flynn Road

Camarillo, CA. 93012-8706.USA Phone: +1 (805) 578-5001

FAX: +1 (805) 579-1808

• For Europe and Middle East: Zebra Technologies Corporation Zebra Card Printer Solutions Pittman Way, Fulwood

Preston, PR2 9ZD Lancashire, U.K.

Phone: +44 — 1 — 772 — 797555 FAX: +44 — 1 — 772 — 693000

980459-001 Rev. A

P330 i User’s Manual

Foreword

This document contains information proprietary to Zebra Technologies Corporation. This document and the information contained within is Copyrighted by Zebra Technologies Corporation and may not be duplicated in full or in part by any person without written approval from Zebra. While every effort has been made to keep the information contained within current and accurate as of the date of publication, no guarantee is given that the document is error-free or that it is accurate with regard to any specification. Zebra reserves the right to make changes, for the purpose of product improvement, at any time.

P330 i is a trademark and Zebra is a registered trademark of Zebra Technologies Corporation. Windows and MS.DOS are registered trademarks of Microsoft Corp. All other trademarks or registered trademarks are marks of their respective holders.

All Zebra Card Printers are warranted against defects in material or workmanship for twelve (12) months from the purchase date.

Proof of purchase or shipment date is required to validate the warranty period. The warranty becomes void if the equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed by the user.

Note • Products returned must be packaged in the original or comparable packing and shipping container. In the event equipment is not so packaged, or if shipping damage is evident, it will not be accepted for service under warranty. Surface Transportation charges for return to customers in the continental United States is paid by Zebra. Otherwise, Zebra pays CPT (carriage paid to) nearest airport, customer pays customs, duties, taxes, and freight from airport to destination. If Zebra determines that the product returned for warranty service or replacement is not defective as herein defined, the customer will pay all handling and transportation costs.

Since printhead wear is part of normal operation, the original printhead is covered by a twelve (12) month date. Warranty period begins on purchase date.

P330 i User’s Manual

980459-001 Rev. A

Foreword

To qualify for this warranty, the printer must be returned to the factory or to an authorized service center. Customers are not required to purchase Zebra supplies (media and/or ribbons) for warranty qualification. If the use of other manufacturer supplies has caused any defect in the printhead for which a warranty claim is made, the user is responsible for Zebra’s labor and material charges required to repair the defect. The warranty becomes void if the printhead is damaged; also if it is determined that failure to follow the preventive maintenance schedule listed in the User’s Guide has caused defect in the thermal printhead for which a warranty claim is made.

All parts, print heads, maintenance kits, options kits, and accessories are warranted to be free of defects in material and workmanship for 90 days (except where otherwise denoted) from date of purchase. This warranty becomes void if the item is modified, improperly installed or used, or damaged by accident or neglect.

Product Disposal Information • Do not dispose of this product in unsorted municipal waste. This product is recyclable, and should be recycled according to your local standards. For more information, please see our web site at: http://www.zebra.com/environment

Declarations of Conformity

RF Emissions control

EN 301489-3 V1.4.1

RF Emissions and Immunity for radio

Immunity to Electro-Magnetic

Radio Frequency Interferences

For a formal certificate, please contact the Compliance Office at Zebra’s Camarillo facility.

980459-001 Rev. A

P330 i User’s Manual

Foreword

EUROPE: Norway Only: This product is also designed for IT power system with phase to phase voltage 230V. Earth grounding is via the polarized, 3-wire power cord.

FI: “Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan” SE: “Apparaten skall anslutas till jordat uttag”

NO: “Apparatet må tilkoples jordet stikkontakt”

Model P330 i conforms to the following specification: FCC Part 15, Subpart A, Section 15.107(a) and Section 15.109(a) Class B digital device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses ans can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference’s by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The user may find the following booklet, prepared by the Federal Communications Commission, helpful:

How to identify and resolve Radio/TV Interference Problems. This booklet is available from the U.S. Government printing Office, Washington, D.C. 20402, Stock No. 004-000- 00345-4. Use of a shielded cable is required to comply within Class B limits of Part 15 of FCC Rules. Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by Zebra may cause, harmful interference and void the FCC authorization to operate this equipment.

Industry Canada Notice

This device complies with Industry Canada ICS-003 class B requirements.

Источник

Инструкция обслуживания Zebra P330i

Перейти на страницу of 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Читайте также:  Postgresql odbc error 126
Summary
Zebra P330i — page 1

980459-001 Rev C Card Printer User ’s Manual Zebra ® P330 i & P330 m .

Zebra P330i — page 2
Zebra P330i — page 3

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual iii Foreword This manual contai ns installation and operation informatio n for the Zebra P330 i and P330 m Card Printers manufactu red by Zebra T echnologies Corporation, Camarillo, California. The only diff erence between th ese models is that the P330 i supports full- co lor ribbo .

Zebra P330i — page 4

iv P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Foreword Copyright Notice Copyright Notice © 2004, 2005 ZIH Corp . This document contai ns information proprietar y to Zebra T echnologies Corporation. This document and th e information con tained within i s Copyrighte d by Zebra T echnolog ies Corporation and may not be duplic .

Zebra P330i — page 5

Foreword Declarat ions of Conf ormity 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual v EUROPE: Norway Only: This pro duct is also designed for IT power system with phase to ph ase voltage 230V . Earth grounding is vi a the polarized, 3-wire po wer cord. FI: “Laite on liitettävä suojamaadoi tus kosketti milla varustettuun pis .

Zebra P330i — page 6

vi P330 i & P330 m Card Printer User’s Manual 980459-001 Rev C Foreword Declarations of Conformity Printer Models The Zebra Product Number tells a story: Here is a quick revie w of the Zebra Ca rd Printer Series numbering and lettering syst em for the P330 i and P330 m Card Pri nters to help you. Model numb ers include ide ntifiers that spe c .

Zebra P330i — page 7

Foreword Declarat ions of Conf ormity 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual vii Icons Throughout t his manual, di ffe rent icons hi ghlight importa nt information, as follows: Note • Indicates information tha t emphasizes or supple ments important points of the main text. Import ant • Advi ses you of information tha .

Zebra P330i — page 8

viii P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Foreword Declarations of Conformity .

Zebra P330i — page 9

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 1 Contents • Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Return Materials Authorization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Copyright Noti ce . . . . . . . . . . . . . . . . . . . . . . .

Zebra P330i — page 10

2P 3 3 0 i & P330 m Card Printer User’s Manual 980459-001 Rev C 3 • Printing a Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Setting Printer Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Printing a Sample Card . . . . . . . . . . . . . . . . . . . . . . . . . . .

Zebra P330i — page 11

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 3 Appendix B • Smart Card Cont act St ation . . . . . . . . . . . . . . . . . . . 51 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Media Loading Orient ation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Zebra P330i — page 12

4P 3 3 0 i & P330 m Card Printer User’s Manual 980459-001 Rev C .

Zebra P330i — page 13

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 1 1 Introduction Thank you for choosi ng the Zebra P330 i or P330 m Card Printer . This manual gu ides you to effic ient start up an d operation of y our new Card Printer .Printer Features. The only dif ference between these model s is that the P330 i supports full-color ribbons (wh .

Zebra P330i — page 14

2P 3 3 0 i & P330 m Card Printer User’s Manual 980459-001 Rev C Introduction Controls, Connectors, and Indicators Controls, Connectors, and Indicators Y our printer has an LCD Display Panel and a Panel Button on the front and a power connect or , power switch, and interface conn ector(s) on the rear panel. LCD Display Panel Panel Button Power .

Zebra P330i — page 15

Introduction Controls, Connecto rs, and Indicators 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 3 LCD Panel The LCD Panel can display t he following me ssages: Message Mode Operational INITIALIZING Scrolling READY Fixed DOWNLOADING DA T A Fixed PRINTING MONO Fixed MAG ENCODING Fixed CONT ACT ENCODIN G Fixed PRINTING CY AN Fixe .

Zebra P330i — page 16

4P 3 3 0 i & P330 m Card Printer User’s Manual 980459-001 Rev C Introduction Controls, Connectors, and Indicators .

Zebra P330i — page 17

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 5 2 Installation and Setup General Information This section will guide you throu gh the installati on and setu p of your P330 i or P330 m Card Printer . This consists of the foll owing procedures, which should be performed in the order presented. • Unpacking the Printer • Instal .

Zebra P330i — page 18

6P 3 3 0 i & P330 m Card Printer User’s Manual 980459-001 Rev C Inst allation and Setup Unpacking the Printer Unp acking the Printer Y our Card Printer ships in a carton and protective anti -static bag. Keep a ll packaging material in case you need to move or re-ship the printer . 1. Inspect the shipping container to e nsure that no da mage h .

Zebra P330i — page 19

Inst allation and Setup Unpacking the Printer 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 7 5. Lift the pr inter out of the carto n by holdin g it with bo th hands. 6. Please ensure that you have a clean and near ly dust free environment for proper operation and storage of the printer . 7. Make sure the following items are in .

Zebra P330i — page 20

8P 3 3 0 i & P330 m Card Printer User’s Manual 980459-001 Rev C Inst allation and Setup Unpacking the Printer If any items are missing, please contact yo ur dealer . T o reorder, please re fer to Appendix D of this manual. 8. Remove packing tape securing the prin te r ’ s Main Cover and Card Feeder Cover . 9. Y our printer ships with warnin .

Zebra P330i — page 21

Inst allation and Setup Unpacking the Printer 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 9 b. Locate the Print Head protection pad and th e Ca rd Cleaning Cartridge location tape (see below). c. Release the Print Head Carriage by pushing th e Print Head Carriage Latc h to the left, and raise the Print Head Carriage . It will .

Zebra P330i — page 22

10 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Inst allation and Setup Installing the Print Driver Soft ware and Setting Driver Options d. Remove the prin t head protecti on pad. K eep the pad, as well as the other packing material and the shipping carton, in case the printer is shipped or move d. If the original material is .

Zebra P330i — page 23

Inst allation and Setup Loading a Ribbo n 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 1 1 • From the main menu of your documentat ion CD, select your desired language and then select “DRIVERS” from the subsequent me nu. The Install W izard will walk you throug h the appropriate steps. • Delete previous versions of the .

Zebra P330i — page 24

12 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Inst allation and Setup Loading a Ribbon b. Raise the Print Head Carriage by p ressing the relea se latch to the left (toward the output hopp er) and lifting as shown below to about a 45 ° angle. The Print Head Carriage will stay in that posi tion, as shown at the right below . .

Zebra P330i — page 25

Inst allation and Setup Loading a Ribbo n 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 13 4. Gently press the p rint head carriage down until it is fully lowe red, as shown bel ow . V ery little force i s neccessary to perform this step. Caution • Do not to uch the print head if the printer has been in service within the las .

Zebra P330i — page 26

14 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Inst allation and Setup Installing the Card Cleaning Cartridge Inst alling the Card Cleaning Cartridge The Card Cleaning Cartri dge cleans the cards en tering the printer . The Card Cleaning Cartridge consists of a Cartridge Frame and an Adhesive Roller , which are packed to geth .

Zebra P330i — page 27

Inst allation and Setup Installing the Card Cleaning Cartridge 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 15 4. Locate the slot at the re ar of the Card Cl eaning Cartridge mounting loca tion; see below . 5. Hold the Card Clea ning Cartridge by the exte nded “handle” (so the large arrow on the top is pointing away from y .

Читайте также:  Драйвер для принтера epson stylus c45 для windows
Zebra P330i — page 28

16 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Inst allation and Setup Setting the Card Thickness Control Setting the Card Thickness Control The Card Thickness Co ntrol is set by the user to adjust th e gap as cards ent er the printer , to prevent double-feeds (whic h coul d cause a jam) or mis-feeds. 1. Open the Card Feeder .

Zebra P330i — page 29

Inst allation and Setup Setting the Card Thickness Control 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 17 3. There are four de tents to set the po sition of the Ca rd Thickness Contro l. Slide the Card Thickness Control to the position corresponding to the following: Detent Position Card Thickness Highest 50 mil (1.27 mm) to .

Zebra P330i — page 30

18 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Inst allation and Setup Loading Cards Loading Cards This section shows how to load plastic cards into the P330 i or P330 m Printer . The pr inter can use cards with a range of thickness from 10 mil (0.25 mm) to 60 mil (1.5 mm). The printer can a lso load and p rint cards fed in d .

Zebra P330i — page 31

Inst allation and Setup Loading Cards 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 19 2. Remove all wrap ping from th e card deck. 3. Holding the card d eck by the sides, hold it vert ically against a flat surface such as a desktop. If the deck is too thick for your hand to hold it comfortably , use about half a deck at a time .

Zebra P330i — page 32
Zebra P330i — page 33

Inst allation and Setup Connecting the Prin ter to your Computer 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 21 Connecting the Printer to your Computer The P330i or P3 30 m Printer includes a standard USB interface. As an option, either printer model can be ord e red with a 10 /100base-T Ethernet Adapter (in addition to the U .

Zebra P330i — page 34

22 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Inst allation and Setup Connecting Power Connecting Power The printer includes an internal AC power su pply that accepts nominal input voltage in the range from 1 10 to 230 volts at 50 to 60 Hertz. The power source must be grounded. Depending on specific model nu mber , your prin .

Zebra P330i — page 35

Inst allation and Setup Printing a T est Card 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 23 Printing a T est Card W ith ribbon and cards loa ded, your printer is rea dy to print. T o check the op eration of the printer , you should print a test ca rd. (Printing a test c a rd does not require that the printer be connected to .

Zebra P330i — page 36

24 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Inst allation and Setup Packing the Printer for Shipment 2. If the printer sti ll has powe r applied an d is turned on, and is still c onnected to the host computer , set the printer’ s power switch (on the back of the print er) to the OFF ( O ) position, and disconnect the int .

Zebra P330i — page 37

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 25 3 Printing a Card Printing with the P330 i or P330 m Card Printer is similar to printing with any other prin ter in a W indows environment. • The Print Driver Software is instal le d on your computer (see Chapter 2). • The printer is connected to the power source and the comp .

Zebra P330i — page 38

26 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Printing a Card Printing a Sample Card “Single Feed Options ” allows Disabling or Enabling Single Feed Supp ort. • If “Disable Single Feed Support” is selected, when the printer runs out of cards in the feeder , the LCD display will read OUT OF CARDS. T o continue, pres .

Zebra P330i — page 39

Printing a Card Feeding O ne Card at a T ime 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 27 8. Once you are ready to print, go to the File menu and select Print . 9. If the printer was not sele cted as the default printer , go to the File menu, select Print Setup and choose Zebra P330 i Card Printer (or Zebra P330 m Card Prin .

Zebra P330i — page 40

28 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Printing a Card Feeding One Card at a T ime .

Zebra P330i — page 41

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 29 4 C leaning Cleaning the Printer Clean your prin ter using Pre-Satu rated Cleani ng Cards provided. The regular use of these cards will clean an d maintain important parts of your prin ter that cannot be rea ched, including the Print He ad, T ransport Rollers, an d optional M agn .

Zebra P330i — page 42

30 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Cleaning Cleaning the Printer How to Clean 1. Leave the Printer power on, or turn it on if it was of f. 2. Initiate the cl eaning process b y either of the follo wing methods: • At the printer , press and h old the panel b utton for several sec onds, until the LC D Panel displa .

Zebra P330i — page 43

Cleaning Cleaning the Print Head 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 31 8. The long clea ning card will automatically feed into th e printer and the printing p rocess will contin ue. The LCD Pa nel w ill again display the messa ge CLEANING PRINTER . 9. When the clean ing process is complet ed, the lo ng cle aning card .

Zebra P330i — page 44

32 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Cleaning Card Cleaning Cartridge Card Cleaning Cartridge Y our printer includes a Card Cle aning Cartridge. This item cleans the car ds en tering the prin ter through the card feeder . T o ensure print qual ity , the cleaning roller require s periodic replacement. New cleani ng r .

Zebra P330i — page 45

Cleaning Card Cleanin g Cartridge 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 33 3. Remove the cleaning rol ler from the Card Cleaning Cartridge and discard. 4. Install new cl eaning rolle r into the Card Cleaning Cartridge. T o avoid contamination, always hold the cleaning ro ller by the e nds. (For replacement cleanin g rol .

Zebra P330i — page 46

34 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Cleaning Card Cleaning Cartridge 6. Replace the Card Clea ning Cartridge into the printer: 7. Close the pr inter main co ver . Note • DO NOT touch the adhesive roller surface that contacts the cards. Card Cleaning Cartridge in final position .

Zebra P330i — page 47

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 35 5 Troubleshooting The table on the next page offers causes and solutions to symptoms rela ted to improper operation. Check the table when experien cing any loss of oper ation or print quali ty . .

Zebra P330i — page 48

36 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C T roubleshooting Problem / Desc ription Cause / Soluti on The LCD Panel displays OUT OF CARDS message. 1. Check for cards in the card feeder . If no cards present, loa d cards. 2. Check that Card Thickness Control lever is properly adj usted (see Loading Cards in Chapt er 2). 3. .

Zebra P330i — page 49

T roubleshooting Print Quality Issues 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 37 Print Quality Issues This section will help you re solve print qualit y problems. The print quality is dependent on several factors. The two most important factor s that will increase your print qua lity are cleanliness and card stock. T o di .

Zebra P330i — page 50

38 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C T roubleshooting Print Quality Issues Possible Cause: • Print Head is dirty . Solution: • Clean the Print Head Possible Cause: • Print Head elemen ts are damaged (e.g., scratched or burnt). Solution: • Call Zebra Custo mer Service for Print Hea d replacement info rmation. .

Zebra P330i — page 51

T roubleshooting Print Quality Issues 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 39 Possible Cause: • Dust or emb edded cont aminati on on elemen ts of the Print He ad. Solution: • Perform a Cleaning of the Print Head (see Chapter 4). Possible Cause: • Ribbon cart ridge may not b e correctly po sitioned. Solution: • .

Читайте также:  Linux delete default route
Zebra P330i — page 52

40 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C T roubleshooting Print Quality Issues Possible Cause • Ribbon may not be installed in the printer . Solution: • Check for ri bbon in the printer . Possible Cause • Cards may not meet specifi cations. Solution: • Use a different supp ly of cards. Possible Cause • Print H .

Zebra P330i — page 53

T roubleshooting T roubleshooting the Ethern et Connection and Adapter 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 41 T roubleshooting the Ethernet Connection and Adapter Resetting to Fa ctory Default s T o reset the Ethernet Adapter config uration parameters to th e factory defaults, press t he Ethernet Switch and hold it in .

Zebra P330i — page 54

42 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C T roubleshooting T roubleshooting the Ethernet Connectio n and Adapter 5. If the LED is alternately fl ashing red and green for long er than 2 minutes, the Ethernet Adapter is in firmware-download mode. This me ans it is waiting for new firmwa re data to be sent before it continu .

Zebra P330i — page 55

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 43 6 Technical Specifications General Specifications • Full colo r dye-sublima tion card pr inting • 25 seconds pe r card single-si ded color printi ng (YMCKO) (P33 0 i only) • Monochrome thermal transfer p rinting Ribbon S pecifications • Patented ribbon core and spindle sy .

Zebra P330i — page 56

44 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C T echnical Specifications Bar Codes Bar Codes • Code 39, Code 128 B & C wi th & without check di git • 2 of 5 and 2 of 5 interleaved • UPC-A, EAN8, and EAN13 • PDF-417 2D bar code and other symb ologies available via Windows printer driver Font s • Arial and Ari .

Zebra P330i — page 57

T echnical Specifications Bi-Directional Communications Interfaces 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 45 Cont act Location for Smart Card ISO St andard 7816 Bi-Directional Commu nications Interfaces •U S B • Built-in Ethern et (optional) Mechanical S pecifications • W idth: 18.2 in (462 mm) • Depth: 9.4 in (2 .

Zebra P330i — page 58

46 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C T echnical Specifications Options .

Zebra P330i — page 59

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 47 A PPENDIX A Magnetic Card Encoder Introduction This Appendix incl udes operation and maintenance requi rements for the P330 i or P330 m Printer with th e optional mag netic card str ipe encoder . (See Chapter 2 for location of the Magnetic Card Stripe Encoder .) The magnetic enco .

Zebra P330i — page 60

48 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Magnetic Card Encoder Sample Encoding Program Sample Encoding Program Refer to the Programmer ’ s Manual (part number 98001-00 1). Magnetic Encoder Cleaning The Magnetic Encoder Read/W rite Head is cleaned as part of the printer cleaning process. If the frequency of encoding er .

Zebra P330i — page 61

Magnetic Car d Encoder ISO S tandar d Encoding 980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 49 ISO S t andard Encoding T rack # Field Sep arator T rack Density V alid Characters # of characters 1 ^ 210 BPI* Alphanumeric (ASCII 20

95 † ) 79 ‡ 2 = 75 BPI* Numeric (ASCII 48

62) 40 ‡ 3 = 210 BPI* Numeric (ASCII 48

Zebra P330i — page 62

50 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Magnetic Card Encoder ISO S tandard Encod ing .

Zebra P330i — page 63

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 51 A PPENDIX B Smart Card Contact Station This section cont ains information o n the additiona l operations of a P330 i or P3 30 m Printer equipped with th e optional Smart C ard Contact S tation. (See Chapter 2 for lo cation.) Introduction Smart Cards can have a built-in microcomp .

Zebra P330i — page 64

52 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Smart Card Cont act St ation Smart Card Contact S tation Inter face Smart Card Cont act St ation Interface When a command to t he printer interface sends a card to the Smart Card Contact S tation, the printer connects the Smart Card Conta ct Stat ion to the female DB-9 connector .

Zebra P330i — page 65

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 53 A PPENDIX C Connecting to a Network Card printers can be connect ed to an Ethernet network in three ways. Printer Sharing In printer sharing, the printer is con nected locally t o the host comput er and configured to be shared to other client co mputers. Client comput ers connect .

Zebra P330i — page 66

54 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Connecting to a Network External Print Server External Print Server A stand alone device that acts as a server on the network specifically for rece iving print jobs and passing t hem to the prin ter . Clien t computers co nnect to the pr int server ove r a network. Internal Print .

Zebra P330i — page 67

980459-001 Rev C P330 i & P330 m Card Printer User ’s Manual 55 A PPENDIX D Worldwide Sales & Support Sales and Support Locations The Americas: Zebra T echnologies, LLC Card Printer Solutions Headquarte rs 1001 Flynn Road Camarillo, CA 93012-87 06 USA Phone: + 1 (8 05) 579 1800 Fax: + 1 (805 ) 579 1808 T oll free in US: (800) 45 2-4056 e- .

Zebra P330i — page 68

56 P330 i & P330 m Card Printer User ’s Manual 980459-001 Rev C Worldwide Sales & Support Web s it e Latin America Sales Office: 9800 NW 41st Street, Suite 220 Doral, FL 33178 USA Phone: + 1 (3 05) 558 3100 Fax: + 1 (305 ) 558-8485 e-mail: latinsales@zebra.com Asia Pacific: Zebra T echnologies Asia Pacific, LLC 16 New Industrial Road #05- .

Документы, которые мы получаем от производителя устройства Zebra P330i мы можем разделить на несколько групп. Это в частности:
— технические чертежи Zebra
— инструкции обслуживания P330i
— паспорта изделия Zebra
— информационные брошюры
— энергетические этикетки Zebra P330i
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Zebra P330i.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Zebra P330i, инструкции обслуживания, короткие инструкции или инструкции пользователя Zebra P330i. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Zebra P330i.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Zebra P330i, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто «руководство» — это технический документ, цель которого заключается в использовании Zebra P330i пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Zebra P330i.

Полная инструкция обслуживания Zebra, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Zebra P330i — В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Zebra P330i, FAQ и самых распространенных проблем — то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание — индекс всех советов, касающихся Zebra P330i, которое найдем в данном документе
3. Советы по использованию основных функций устройства Zebra P330i — которые должны облегчить нам первые шаги во время использования Zebra P330i
4. Troubleshooting — систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Zebra P330i
5. FAQ — чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Zebra P330i в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Zebra P330i?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Zebra P330i, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Zebra P330i со всей вероятностью он захочет поделиться методом ее решения.

Источник

Поделиться с друзьями
КомпСовет
Adblock
detector